Instruments & Meters

SinceVision Introduces Wide-Spot Laser Sensor for Rough-Surface Metrology

The SGI-N030W combines an expanded laser spot with dual-sensor synchronisation for micrometre-level displacement and in-line thickness measurement.

Zara MahmoudNovember 17, 20265 min read0 views

A conceptual wide-spot laser sensor measures a moving metal web between paired sensor heads on a precision production gantry.

SinceVision has introduced the SGI-N030W, a wide-spot laser displacement sensor designed for high-speed, non-contact dimensional measurement on rough, textured and irregular surfaces. The product extends the company’s SGI Series and is aimed at micrometre-level applications in lithium-ion battery manufacturing, semiconductor processing and precision mechanical engineering.

The sensor uses an expanded laser spot and optical triangulation. SinceVision says the wider spot is intended to overcome instability associated with conventional point-spot laser sensors when surface finish varies. In point-spot systems, reflected energy is concentrated on a small area, so microscopic scratches, grain boundaries, brushed textures and matte finishes can produce signal changes that are interpreted as dimensional variation. The company says this can lead to false defect warnings and extra inspection.

With the SGI-N030W, reflected light is collected across a broader area, averaging localised microscopic peaks and valleys before signal conversion. SinceVision says this reduces the influence of surface roughness and optical scattering on materials such as drawn metals, sandblasted surfaces and coated battery foils. This is a design objective and company claim rather than an independently verified result.

Specifications and interfaces

The sensor has a 30 mm reference distance and a ±5 mm measurement range. SinceVision specifies repeatability of 0.05 µm on a diffuse white target under static conditions, and linearity of ±0.02% of full scale across the range. A 50 kHz sampling frequency, equivalent to a 20 µs update interval, is intended to support high-speed measurement and monitoring of dynamic processes.

Communication options include RS485, 100Base-TX Ethernet and switchable analogue outputs for 4–20 mA current or 0–10 V voltage signals. The system also supports master-slave synchronisation, allowing two sensor heads to operate in opposition and measure from either side of a component or moving material.

Battery electrode thickness

One of the main applications identified by SinceVision is in-line thickness measurement of lithium-ion battery electrodes. Coating thickness and uniformity affect energy density, internal resistance and long-term cell stability. The company notes that offline contact micrometers or drop indicators can introduce operator variability and may deform wet or uncured electrode material, while periodic spot checks do not provide continuous coverage across a production reel.

In the proposed arrangement, two synchronised sensors sit above and below a moving electrode web on a calibrated, low-thermal-expansion marble gantry. The opposing heads measure their respective clearances to the material, and a controller combines these readings with the fixed mounting datum to calculate absolute electrode thickness in real time. SinceVision reports that production trials achieved stable, repeatable thickness measurement within ±0.3 µm at a web speed of 300 mm/s. The 50 kHz sampling rate is intended to provide high longitudinal resolution for detecting localised coating agglomerations, edge thinning and exposed substrate before cell winding.

Other target applications

In semiconductor manufacturing, the sensor is intended for non-contact checks where wafer surfaces are sensitive. Potential uses include wafer position verification, edge detection, height measurement, and checking wafer seating and chuck alignment in atmospheric transfer modules and vacuum load-lock systems.

For precision assembly, SinceVision says the sensor can monitor voice coil motors, linear actuators and micro-steppers. Its sampling rate is intended to capture transient displacement, mechanical oscillations, settling behaviour and end-stop overshoot across the full measurement range. Position data can be sent to machine control systems over Ethernet for real-time monitoring and process control.

Surface-related errors

Jack Li, global sales and marketing director at SinceVision, says false defect warnings caused by surface texture remain a recurring challenge in battery manufacturing and precision assembly. According to Li, conventional point-beam laser sensors can read microscopic scratches and rough coatings as actual thickness changes, slowing production lines and creating additional manual inspection work. The SGI-N030W’s expanded optical spot is designed to average out such surface-related variation, while synchronisation between opposing heads supports high-speed thickness verification.