KraussMaffei Extrusion has introduced PVC InlineMixing, a single-stage continuous process for making PVC roofing membranes that replaces the conventional two-stage dryblend route. The company says the system can reduce energy consumption—and therefore energy costs—by up to 75%, depending on formulation, system parameters and location, while shortening production time and improving flexibility.
From batch mixing to direct extrusion
In the traditional route, PVC powder, plasticizers, additives and fillers are mixed batchwise in a separate hot-cold mixer to produce dryblend. After cooling and intermediate storage, the compound is plasticized in a twin-screw extruder and formed into membrane. PVC InlineMixing feeds all solid and liquid components directly into the extruder through gravimetric dosing systems, eliminating the separate mixing step and the associated cooling and storage.
Cost and footprint implications
Because no separate heating-cooling-mixing combination is required, the company says manufacturers avoid that investment and heat the material only once. It also cites lower space requirements, lower labor costs and lower maintenance costs, since wear parts for the hot-cold mixer are no longer needed. The combination of lower capital expenditure and operating costs is presented as the basis for a fast return on investment.
KraussMaffei Extrusion also emphasizes production flexibility. Formulation adjustments and color changes can be made directly during operation through the integrated control system, according to the company, removing the need to prepare and store separate dryblend batches.
Christopher Bartel, head of sales flat and foam at KraussMaffei Extrusion, says the process offers membrane manufacturers lower production costs, greater flexibility and more efficient manufacturing. He says producers can respond more quickly to new requirements and adjust formulations directly during production while reducing energy and capital expenditure.
Validation and reference line
The process was developed at KraussMaffei Extrusion’s Technology Center in Laatzen and validated with industrial roofing-membrane formulations. The trials used a co-rotating twin-screw extruder from the ZE 65 BluePower series, equipped with loss-in-weight feeders for all solid components and multiple liquid feeders for free-flowing ingredients. The ZE BluePower series has a Da/Di ratio of 1.65; the company says the combination of high torque and large free volume provides a broad process window for different formulations.
Tests confirmed what the company describes as excellent PVC gelation and high product quality. Mechanical properties and weldability met industrial requirements across several formulations, according to KraussMaffei Extrusion. Bartel says the Technology Center works with customers to test specific formulations under production-relevant conditions, optimize the process and prepare for industrial implementation.
Industrial use
PVC InlineMixing is already running in an industrial production line for PVC roofing membranes. The reference plant uses two extruders and two calenders to achieve a total throughput of 1,800 kg/h. PVC, additives and fillers, along with edge trimmings generated in the process, are continuously processed directly into finished membranes.
The announcement presents the process as a way to combine product quality with a leaner production route. The reported benefits are conditional: energy savings vary with formulation, system settings and site, and the validation results relate to the formulations and equipment tested. For roofing-membrane producers, the significance lies in the removal of a separate batch-mixing stage and the possibility of changing formulations during continuous operation.
