Fives High Precision Machines (Fives HPM) has developed the Liné Machines RoboTDM, a robotic machining system that brings milling, trimming and drilling to large workpieces instead of moving those parts into a large CNC machine. The company says the approach suits applications where tolerances of about 0.1 mm are acceptable and where a full CNC machine would add cost, footprint and programming burden.
RoboTDM equips an industrial robot with an end effector carrying a spindle, toolholder and cutter. Fives says this configuration allows material removal directly on the workpiece, with faster setup and easier programming than a large CNC machine for suitable parts. The system is intended for operations such as face milling, deburring castings, trimming weld beads, drilling pilot holes in large aerospace panels or automotive body parts, and trimming, routing, drilling, edge contouring and pocketing composite or thermoplastic fabrications.
Accuracy gap
Conventional industrial robots typically reach tolerances around 0.3 mm, which Fives says is not enough for many machining tasks. Its development work on high-precision robotic machining combined robot calibration with look-ahead and motion-planning algorithms. Fives says the system can process programs with more than one million points without latency that would otherwise compromise motion, producing smoother trajectories for multi-axis contouring and complex operations. According to the company, RoboTDM can reduce machining deviation by up to 100 μm (0.1 mm), a threefold improvement over conventional robotic accuracy.
Configuration and process options
The machining end effector can be configured with different spindle sizes, power ratings, torque and speed. Fives lists available spindle power up to 125 kW, torque up to 80 Nm and speeds reaching 30,000 rpm, with HSK A63, HSK F63 or HSK A100 taper toolholders. RoboTDM can also include automatic tool changing, tool measurement, tool-breakage detection and part probing, while a vision system can support drilling. Beyond machining, the platform can be configured for waterjet cutting, laser profiling and ultrasonic cutting.
Fives says RoboTDM can be set up with multiple workstations and customized peripheral equipment, and its relatively modest foundation requirements simplify installation compared with a large CNC machine. The company identifies aerospace, defense, maritime and energy as sectors where large component dimensions and varying production requirements may make the approach attractive.
Trials and limits
Fives reports that a multi-year R&D project and development trials demonstrated cycle-time reductions of up to 70% in trimming and milling, with some individual applications achieving greater savings. The company does not present the system as a universal replacement for CNC machining: where tolerances tighter than 0.1 mm are required, a high-precision CNC machine remains the appropriate choice. Fives therefore describes RoboTDM as complementary to Liné Machines and the wider Fives HPM machine-tool portfolio, giving manufacturers another option between conventional robotics and a large CNC machine tool.
The development originated from customer requirements, according to Fives, and reflects its approach of engineering around specific manufacturing challenges rather than forcing applications into standard equipment. Fives Liné Machines Inc, now part of Fives HPM, has had a North American presence for almost 50 years through its facility in Granby, Quebec, Canada. The plant produces Liné CNC machine tools and robotic solutions including RoboTDM, and the site supports engineering, integration, automation, service and training across equipment lifecycles.
