When Eddie Andrews joined 3T-AM in November 2021, the Newbury manufacturer could make a one-off metal component for any of hundreds of customers. The harder problem was winning the order to make the same component again, at the agreed price and on schedule. “How do you make that boring?” Andrews recalled. “How do you make that general manufacturing?” Five years later, the commercial director places around 70% of revenue in production, while new product introduction still takes up roughly 80% of the team’s time.
A production model, not a prototype portfolio
The shift was not simply a matter of buying more printers. By the 2021 reset, years of accommodating individual prototype jobs had left 3T-AM with a series of ad hoc processes. The company narrowed its customer base, gave larger accounts more influence over what it developed and simplified accumulated procedures. Much of the work remained manual while the team established which operations it could reliably repeat.
Responsibility also moved. Previously, the first person to see a drawing was the engineer responsible for printing it, so the first question was how to print the part. Decisions made at that point shaped the work handed to everyone else. Today a product owner is responsible for delivering the finished component, and print and machining specialists agree what condition the part should be in as it passes from one operation to the next.
Andrews’s argument is that metal printing alone does not make a production supplier. A successful additive manufacturer also has to be a really good CNC machining company, he said. Bringing machining in-house gave the SME more control over cost, quality and delivery dates. Larger multi-laser machines improved productivity at the printing stage. Neither investment by itself could tell a customer when a finished part would arrive.
The order book changes the investment case
The commercial transition was harder to time than the equipment changes. Production orders rose and then tapered off. Turning away too much prototype work during the upswing would have left gaps when demand eased. Repeat orders now give 3T-AM room to choose which development jobs to take. Some will never become production contracts, Andrews said, but if the company does not take part in the journey, it will never find out.
A full order book also changes how new capacity is justified. Previously, 3T-AM might have bought an EOS M400 to try a different material and see what business it could develop. Today, Andrews said, customers’ programmes account for the capacity of incoming machines before they reach the factory. “The investment is quite boring, actually.”
SBO, the Austrian precision manufacturing group, acquired 3T-AM in October 2025. The Newbury business had generated around £5 million in sales in 2024. SBO brought experience in machining downhole drilling equipment, including components up to ten metres long, and was interested in 3T-AM’s metal printing expertise and access to a different set of industrial customers. SBO approved a five-year business plan, then asked whether it could be done quicker. In August 2026, the group reported that 3T-AM had added an EOS M400 in the second quarter, ordered another printer and invested further in post-processing, as part of a seven-printer expansion across UK and US operations.
A full order book makes the next machine easier to justify, but it leaves little time on that machine to qualify a different material or develop a new product. Andrews wants to preserve two distinct reasons to invest: contracted demand, and work that 3T-AM cannot yet offer.
Where production economics get harder
The customer mix reflects that tension. Semiconductor customers generate the strongest demand, followed by energy, then space and defence. Aerospace remains central to the company’s plans, but 3T-AM has found work for its machines while it waits for more aerospace programmes to reach suppliers at volume.
For some customers, replacing a casting with a printed part earns its keep through lead time alone. A legacy or development programme can obtain a component sooner, even at much the same unit cost. At higher volumes the calculation becomes tougher. Machine maintenance contracts and consumables weigh on the hourly rate, and a factory working a single shift has fewer productive hours over which to spread those costs. Andrews sees scope to learn from CNC shops that operate around the clock. One place he would look for automation is support removal, where the process can still depend on what an experienced operator knows about a particular job.
A pre-pandemic aerospace enquiry shows the scale of commitment that production work can require. A single family of parts would have needed 16 multi-laser systems to cover only a share of the requirement. From the buyer’s side, the question was how many suppliers had the floor space, the capital and the capacity to take it on. Andrews sees that as one reason original equipment manufacturers still keep sizeable additive programmes in-house.
Making the part’s footprint visible
The next test is not only whether a printed part can be made, but what it can document. A project with Honeywell Aerospace, under an Aerospace Technology Institute-funded programme, is converting an existing conventionally manufactured component to additive. The sustainability team at the NCC in Bristol is carrying out a 12-month life-cycle assessment covering manufacture, service and end of life. Printing closer to the finished shape should use less feedstock and leave less metal to machine away than starting with billet. The study will compare the two manufacturing routes alongside any benefit the redesigned component delivers in service.
The intended outcome in Newbury is something a purchasing department could use. As 3T-AM connects its factory and enterprise systems, it is developing digital product passports to document the carbon associated with making an individual component. By the end of 2028, Andrews wants that information to come with every part at no extra charge. For a customer compiling a supply-chain emissions report, it would become one more thing they could expect from a routine order.
The “boring” question, then, is not whether 3T-AM can print an impressive prototype. It is whether the company can make repeatability, machining discipline, capacity planning and traceable reporting routine. That is a different kind of additive manufacturing business, and the order book is where it is being tested.
